scroll and find out more...
Harvesting Technology - 2-row | SELECT 200
Centre trailed, 2-row, various separators for different soil conditions
Harvesting procedures with continuous overloading are particular efficient. The 2-row elevator harvester SELECT 200 combines this high performance with maximum crop protection. The straight crop flow, minimal drop steps and a wide range of different separators are the most important arguments for this harvester. In addition, the open design of the main frame offers a very good view across the entire machine. With the patented MultiSep respectively double MultiSep, the machine can be adapted to all harvesting conditions. The proven technology is particularly gentle to the crop, even under the most difficult soil conditions. For haulm separation, the machine can be additionally equipped with a fine haulm elevator or a blower. The length and flexibility of the cart elevator ensure a smooth and gentle discharge of the crop even into deep trailers.
- Please select...
- Highlights
- Benefits
- Images / video clips
- Configuration
Double MultiSep for changing harvest conditions
Twice as much MultiSep for twice as much power - adaptable to a wide range of conditions.
Best separation result
For the most difficult soil and harvesting conditions, the machine can be equipped with a Roller Separator in combination with MultiSep.
Elevator with active side panels for gentle crop handling
The conveying pockets are closed on both sides by elastic rubber fingers. They enable gentle crop transport without friction. At the same time, the rubber fingers are so flexible that they can be used permanently and almost wear-free at all deflection points.
Additional cleaning
The cart elevator can be equipped with the perforated, high-strength, permanently elastic PU pockets, called OptiBag. The large-volume, net-like conveying pockets ensure an additional sieving of heavy soil during the overloading process of the crop.
Benefits
- Crop protection
- Main webs with high-cam belt for optimum gentle crop handling
- Reduced drop heights throughout the machine for a gentle crop transfer
- Gentle but high capacity harvesting
- High acreage performance and separating effect.
- Haulm separation is carried out with a extracting roller, extracting unit or fine fine haulm elevator.
- Versatile sieving helps: Rotary agitator and / or hydraulic rocker agitator
- Double MultiSep separator, the “all-rounder“, even in heavy harvesting conditions
- Separator, model roller separator with TwinSep
- With the patented Vario-RS, the infinitely roller distance adjustment, it is possible to react to different crop sizes and harvesting conditions at any time (without roller change).
- Blower: The airflow which is generated by the Blower, separates dry haulm and light trash from the harvest flow and conveys it to the rear and out of the machine
- The machine can be equipped with a large picking table for up to four persons. A hydraulic drive with infinitely variable speed adjustment is available.
- A "Cascade"-sieving system loosens the crop flow without drop steps and agitator movements
- Chassis
- The hydrostatic wheel drive provides additional tractive force. This is particularly useful in wet harvesting conditions and in combination with narrow tyres on the tractor.
- A second hydraulic cylinder for inclination allows the entire machine to be raised in a steeper position, and thus increases the sieving performance.
- Perfectly comfortable
- SmartView: The video system includes a 12 inch touch screen with the feature to zoom-in, live slow motion, live image transmission via WiFi, Visual Protect Pro and the possibility to record the displayed image.
- Visual Protect Pro: Automatically, simultaneous switch-on of several cameras, where a critical situation has been noticed (risk of a separator blockage e.g.), so that the driver can react and prevent further blockages or damages of the machine.
- Speedtronic-Web: Completely automatic speed control of the main webs depending on the driving speed of the tractor and the load on the main webs.
- Speedtronic-Elevator: Automatic speed control of the elevator, based on the filling level with crop for maximum crop protection
- ISOBUS operator terminal CCI 800 or CCI 1200, with intuitive operating interface GDI and diagnostic option, to realize a high operator comfort.
- MemoryControl: For saving and "re-use" of specific harvest parameters
- TerraTronic: Accurate depth control using the ridge pressure
- TerraControl: Hydraulic ridge pressure relief and independent depth control Terra control.
- TerraDisc: Digging with driven disc coulter and without diablo roller (therefore no additional soil compaction) and depth control via skids
- Elevator is suitable for high trailers and deep unloading into the trailers. Equipped with so-called "active side panels" for low maintenance
- Versatility
- Two different frame length available (M- or S-version)
- The machine can be equipped with a windrow intake for the delayed, discontinuous ("two-phases") harvesting process.
- Depending on the cultivation method (rows, beds, flat beds etc.), a wide range of different vegetables can also be harvested besides potatoes.
Specifications
You'll find all the information about the standard features of the machine here.
Configuration
- Tractor attachment for drawbar eye with a diameter of 40 or 50 mm
- Drive shaft 540 rpm with overrun clutch
- Hydraulic levelling
- Hydraulic axle steering
- Wheels 600/50 R22.5
- Ridge intake via pulled intake unit incl. 4 pulled and spring-loaded disc coulters, distance of the disc coulters: 540, 580 or 620 mm.
- 2- or 3-piece share blade
- 2 diablo rollers with flat shoulders
- 2 outer haulm feed in rollers and centre retaining rubber
- Speed adjustment of the rocker agitator in the 1st main web adjustable via the operator terminal
- Extracting roller against 1st main web
- 1st main web: 28, 32, 35, 40, 45 or 50 mm pitch
- 2nd main web: 32, 35, 40 or 45 mm pitch
- Powerful hydraulically driven cart elevator
- Brake system and lighting system
Technical data
4900-010 SELECT 200 M - RollerSep
Dimensions | |
---|---|
Length | ab 10361 mm |
Width | 3000 - 3450 mm |
Height | 3873 mm |
Weight | |
Empty weight with basic configuration | 8512 kg |
Tractor attachment | |
Drawbar eye / low hitch | x |
Low hitch | x |
Drive | |
Input speed p.t.o.-shaft | 540 / 1000 rpm |
Main webs | |
Intake web width | mm |
1st main web width | 1700 mm |
2nd main web width | 1700 mm |
Sieving area intake web | m² |
1st main web sieving area | 7,17 m² |
2nd main web sieving area | ab 0,94 m² |
Unloading elevator | |
Service | ab 120 t/h |
Transfer height | 4000 mm |
Transfer width | 3500 mm |
Wheels | |
Wheels | 600/50 R22.5 |
Chassis and engine | |
Air brake | x |
Transport speed | 25 km/h |
Transport speed (option) | 30 km/h |
Tractor requirements | |
Engine power (min.) | 75 kW |
Oil flow | 70 l/min |
Required control valves (single acting) | 1 |
Non-pressurized return flow | 1 |
Required control valves (double acting) | 1 |
Permitted bearing load drawbar | ab 1350 kg |
4900-110 SELECT 200 S - RollerSep
Dimensions | |
---|---|
Length | ab 10996 mm |
Width | 3000 - 3450 mm |
Height | 3873 mm |
Weight | |
Empty weight with basic configuration | 9191 kg |
Tractor attachment | |
Drawbar eye / low hitch | x |
Low hitch | x |
Drive | |
Input speed p.t.o.-shaft | 540 / 1000 rpm |
Main webs | |
Intake web width | 1700 mm |
1st main web width | 1700 mm |
2nd main web width | 1700 mm |
Sieving area intake web | 2,29 m² |
1st main web sieving area | 5,64 m² |
2nd main web sieving area | ab 0,94 m² |
Unloading elevator | |
Service | ab 120 t/h |
Transfer height | 4000 mm |
Transfer width | 3500 mm |
Wheels | |
Wheels | 600/55 R26.5 |
Chassis and engine | |
Air brake | x |
Transport speed | 25 km/h |
Transport speed (option) | 30 km/h |
Tractor requirements | |
Engine power (min.) | 85 kW |
Oil flow | 70 l/min |
Required control valves (single acting) | 1 |
Non-pressurized return flow | 1 |
Required control valves (double acting) | 1 |
Permitted bearing load drawbar | ab 1350 kg |